CompTIA N10-009 Practice Exams
Last updated on Apr 01,2025- Exam Code: N10-009
- Exam Name: CompTIA Network+ Certification
- Certification Provider: CompTIA
- Latest update: Apr 01,2025
Which of the following most likely determines the size of a rack for installation? (Select two).
- A . KVM size
- B . Switch depth
- C . Hard drive size
- D . Cooling fan speed
- E . Outlet amperage
- F . Server height
Which of the following most likely determines the size of a rack for installation? (Select two).
- A . KVM size
- B . Switch depth
- C . Hard drive size
- D . Cooling fan speed
- E . Outlet amperage
- F . Server height
A network administrator notices interference with industrial equipment in the 2.4GHz range.
Which of the following technologies would most likely mitigate this issue? (Select two).
- A . Mesh network
- B . 5GHz frequency
- C . Omnidirectional antenna
- D . Non-overlapping channel
- E . Captive portal
- F . Ad hoc network
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3
Access Points and a single switch. The network must meet the following parameters:
The SSIDs need to be configured as CorpNet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access Points and switch are on should only support 30 devices maximum The Access Points should be configured to only support TKIP clients at a maximum speed
INSTRUCTONS
Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3
Access Points and a single switch. The network must meet the following parameters:
The SSIDs need to be configured as CorpNet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access Points and switch are on should only support 30 devices maximum The Access Points should be configured to only support TKIP clients at a maximum speed
INSTRUCTONS
Click on the wireless devices and review their information and adjust the settings of the access points to meet the given requirements.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Which of the following requires network devices to be managed using a different set of IP addresses?
- A . Console
- B . Split tunnel
- C . Jump box
- D . Out of band
A network administrator needs to connect two routers in a point-to-point configuration and conserve IP space.
Which of the following subnets should the administrator use?
- A . 724
- B . /26
- C . /28
- D . /30
A technician is troubleshooting a user’s laptop that is unable to connect to a corporate server. The technician thinks the issue pertains to routing.
Which of the following commands should the technician use to identify the issue?
- A . tcpdump
- B . dig
- C . tracert
- D . arp
Which of the following fiber connector types is the most likely to be used on a network interface card?
- A . LC
- B . SC
- C . ST
- D . MPO
A network administrator is deploying a new switch and wants to make sure that the default priority value was set for a spanning tree.
Which of the following values would the network administrator expect to see?
- A . 4096
- B . 8192
- C . 32768
- D . 36684