DELL EMC D-PSC-MN-01 Practice Exams
Last updated on Apr 05,2025- Exam Code: D-PSC-MN-01
- Exam Name: Dell PowerScale Maintenance
- Certification Provider: DELL EMC
- Latest update: Apr 05,2025
Which cluster interface provides the most detailed network traffic statistics and enables file and directory operations on the cluster?
- A . Web console
- B . Serial console
- C . Platform API
- D . CLI
A platform engineer is at a customer site to replace a failed Dell EMC PowerScale Gen 6 node. After removing the compute module, they observe lit LEDs inside the removed node.
What is the recommended response?
- A . This is not normal; they need to shut down the partner node.
- B . There is an internal electrical fault; they should call support.
- C . The node is not yet completely shut down; they should wait.
- D . This is normal; they should continue with the procedure.
After finishing the installation of a Dell EMC PowerScale Gen 6 cluster, a customer asks the platform engineer to demonstrate the proper way to remove and replace the front node bezel. They remove the bezel successfully.
What is the correct way to replace the bezel?
- A . Make sure all the front-loaded hard drives have no red LEDs, then replace the bezel and secure it with the thumb screws.
- B . Center the bezel faceplate on the node chassis and press the left side, then the right side, until the bezel clicks.
- C . Push on the bezel ends and press the bezel until it latches.
- D . Align the bezel ends with the clips and press the bezel center.
After finishing the installation of a Dell EMC PowerScale Gen 6 cluster, a customer asks the platform engineer to demonstrate the proper way to remove and replace the front node bezel. They remove the bezel successfully.
What is the correct way to replace the bezel?
- A . Make sure all the front-loaded hard drives have no red LEDs, then replace the bezel and secure it with the thumb screws.
- B . Center the bezel faceplate on the node chassis and press the left side, then the right side, until the bezel clicks.
- C . Push on the bezel ends and press the bezel until it latches.
- D . Align the bezel ends with the clips and press the bezel center.
A platform engineer needs to run some commands on Node 2 of a Dell EMC PowerScale cluster.
Which command can they use to get the external IP address of Node 2, regardless of what node they are currently logged on to?
- A . isi status -q
- B . isi network external view
- C . isi status -p
- D . isi network subnets list
What type of drive should a customer use to ensure that their data is encrypted?
- A . NVMe
- B . SSD
- C . SED
- D . Hard drive
Which model is a part of the Isilon Gen6 platform?
- A . F600
- B . F810
- C . F900
- D . F200
A platform engineer needs to swap an NVDIMM battery.
What prerequisite conditions are required to prevent data loss when removing the NVDIMM battery?
- A . None C the NVDIMM battery is hot-swappable
- B . The node is switched off and must be removed from the power feed
- C . LEDs on the NVDIMM battery must be off
- D . Node, LEDs on the node, LEDs on the NVDIMM, and LEDs on the NVDIMM battery must be off
An engineer runs ini_reformat_node command.
What are they attempting to do?
- A . Reformat the mirrored FEC data.
- B . Reformat a node quickly to repurpose a node.
- C . Reformat the mirrored journals.
- D . Reformat a node to securely erase all data.
Which two backend switches support 100 GbE?
- A . DCS-7308
- B . S5232-ON
- C . 29264-ON
- D . D4040