NACE NACE-CIP1-001 Practice Exams
Last updated on Apr 05,2025- Exam Code: NACE-CIP1-001
- Exam Name: Coating Inspector Level 1
- Certification Provider: NACE
- Latest update: Apr 05,2025
Which of these tests uses a syringe?
- A . Sleeve test
- B . Potassium ferricyanide
- C . Bresle patch
- D . Soluble salts meter
As a NACE Coating Inspector your responsibility with respect to safety is to:
- A . Assume the role of the Safety Inspector
- B . Check the PPE used by the Applicators
- C . Act in accordance with the site safety requirements and set an example
- D . Check the credentials of the Safety Officer on site
When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that:
- A . Chloride salt may produce a false positive
- B . Synthetic oil or grease may not be identified
- C . Ultra-Violet light may contaminant the surface
- D . Presence of weld spatter may produce a false positive
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A . Advise the Contractor he cannot proceed
- B . Advise the Contractor he can proceed
- C . Advise the Contractor of your readings
- D . Call your supervisor
ISO SA 2.5 is defined as:
- A . Near White Metal Blasting
- B . Thorough Blast Cleaning
- C . Very Thorough Blast Cleaning
- D . Light Blast Cleaning
Removal of surface contaminants is done by:
- A . Abrasive blasting
- B . Waterjetting
- C . A combination of methods
- D . Scarifying
Excess moisture during holiday testing can cause erroneous indications by creating a path across the surface of the coating to pinholes previously detected, or directly to the signal return connection.
This is often referred to as:
- A . telegraphing.
- B . monitoring
- C . juxtaposing.
- D . transitioning.
Galvanic corrosion occurs on which of the following substrates:
- A . Concrete
- B . Fiberglass Reinforced Plastic
- C . Metal
- D . Wood
Using SSPC Vis 1 as a guide when performing a visual inspection of a steel surface prior to surface preparation a NACE Inspector would assign which designations to the surface condition:
- A . Rust Grades A-D
- B . Surface Conditions E-G
- C . Rust Grades 1-4
- D . Surface Condition H
Non Conformance Reports are completed by the Inspector:
- A . In every instance that an item does not meet the specification requirements
- B . When the Inspector deems it to be a significant non-conforming item
- C . When the Inspector and Contractor deem it to be a significant non-conforming item
- D . In accordance with the specification’s definition of a non-conformance